Report
![[Laser cut and engrave] Welcome to our pool sign](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/eb92f33a-5405-4e1b-a1ca-0f7b34cb4785?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Welcome to our pool sign
InstructionWelcome To Our Pool
.xcs
Application scenario
Laser (40min)
Machine & module
xTool S1
40WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
46
472
Information
With the summer heat on its way, I wanted a way to open our pool, so I made this sign.
78/312
Instruction
1
Step1: Design 1
Preview
Preview
The first step was taking a circle and a square and subtracting the square from the circle. Then, I resized it to make it look like an island. Next, I imported some palm trees from the xTool content library to make it look like an island with plants.
2
Step2: Design 2
Preview
Preview
Then, I made a circle that I will set to cut, and finally, I added the saying "Welcome to our pool."
3
Step3: Material
Preview
For this, I used basswood, but I also think that acrylic would work better as I'm planning on putting it outside.
4
Step4: Laser time
Preview
Now it's time to laser. Just remember that this is an S1 40 watt, so you might need to change the settings for your machine or material. Also, don't forget your laser safety glasses.
5
Step5: You're Done
Preview
Good news! You're done. Now all you need to do is get to swimming.
Comments
