HomeTemplatesToys & Games & ModelsTic-tac-toe
hey2austin
Report
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

3D Bunny

Instruction
3D Bunny.xcs
3D Bunny
.xcs
Application scenario
Laser (10min)
Machine & module
xTool D1
20W
Material used
cardboard
94
988
Information
      I made this as a decoration for Easter. I would recommend
Instruction
1
Step1: Cutting

Cut the bunny out from your material. I used cardboard as my material, my settings were 1750mm at 90%

2
Step2: Assemble the bunny
Preview

First, slide the body of the bunny into the middle notch of the tail. Next slide the two big legs into the notches closest to the body. Then, slide the small legs into the remaining notches. Lastly, slide the ears onto the head.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1
xTool D1

License

CC BY-NC