Report
Framed Metal Cards made with LightBurn and Xtool Creative Space
InstructionmetalCards - Famous Deaf Figures
.xcs
Show 1 more
Application scenario
Laser (40min)
Machine & module
xTool F1
10WCompatibles · 7
Material used
3mm Basswood Plywood
Black Metal Business Card
39
754
Information
Metal Xtool black cards framed with wood, with magnets inserted in the corners to stick onto things!
Instruction
1
Step1: Laser out the frames
Preview
Ok, so this one is a bit of a doozy due to how many laser settings I have going on in LightBurn.
- Engrave an inlay for the metal business cards to slot into
- Engrave an image into the center, for the center to be recycled since we're cutting that out
- Laser score the patterns, can be any vector patterns onto the frame, and magnet covers
- Cut everything out!
- Glue in magnets/wall hangers along with the magnet covers
In the lightburner file I attached, I also included a way to make wall hangers for the cards if you don't want to use magnets. Assemble those by snapping them together and putting glue onto the corners. Then just glue to the frame and slot onto a nail, screw, etc.
2
Step2: Engrave the metal cards!
Preview
Zap the business cards out then slot them into the frames with some glue. You're a creator, Harry!
Beware, the settings above didn't allow me to input dot duration per us, which seems to be a F1 only thing. It's actually 10 dot duration/us.
Comments
Remixes
xTool Supplies Used in This Template