HomeTemplatesDecorHome DecorShelves & Holders
Laser Craft
Report
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Leash Hanger Sign

Instruction
Dog Board for Basket and Hooks.xcs
Dog Board for Basket and Hooks
.xcs
Application scenario
Laser (60min)
Machine & module
xTool D1
5W
Material used
1in birch plywood
14
288
Information
      We wanted somewhere to hang the dog leashes close to the door. We bought the basket/hooks from Lowes. It looked silly hanging on the wall, so I made the board and attached the basket/hooks to it.
Instruction
1
Step1: Prep wood

I had scrap plywood, so I used it for this project. It was stained grey, so I sanded it down with an orbital sander - 220 grit, followed by 440 grit. I stopped sanding when I liked the amount of grey still showing through. They board is 18" wide by 16" tall. The basket fits perfectly on the board. The names can be changed when the file is downloaded.

2
Step2: Engrave design
Preview

I setup the laser and graved using the fore mentioned settings.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1
xTool D1

License

CC BY-NC