HomeTemplatesDecorHome DecorWall Art
MM
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Silverstone race circuit engraved wooden map

Instruction
Silverstone.xcs
Silverstone
.xcs
Application scenario
Laser (25min)
Machine & module
xTool D1 Pro
5W
Compatibles · 8
Material used
3mm Birch Plywood
98
1129
Information
      This map features the Silverstone race circuit along with some facts and history at the bottom. I used A4 3mm birch plywood for this project that can be framed and displayed on the wall.
Instruction
1
Step1: Design
Preview
Preview
Preview

To create the map portion of this design I used snazzymaps.com and then manually drew the race track outline using the original map as a template.

 

Once I had the track outline and the map image, I researched some facts about the circuit to engrave at the bottom. 

2
Step2: Engrave
Preview

I made this design 200x300mm but the size can easily be adjusted by selecting all parts of the design and entering the dimensions on the right tool panel in XCS.

 

3
Step3: Finish
Preview

Once engraved you can then display in a frame or add a varnish or wax to the wood to give a shiny finish to display on the wall or shelf.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Birch Plywood
3mm Birch Plywood

License

CC BY-NC-SA