![[Laser cut and engrave] 10 finned Vase](https://image-res.xtool.com/ali-res/community/making/262816ba-54e5-45f6-aa3e-e235319be918.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
10 finned Vase
Instruction
Information
Well there are flowers that grow in the wild and there are flowers picked to share with someone special. here is a place you can put the picked flowers .
Instruction
Step1
Step 1) With this project all the parts are laid out in the work area, there are several pockets that need to be adjusted based on what thickness wood you are using, 1/4" or 6.3mm then each pocket needs to be those sizes. this is a simple thing to do by adjusting the overall size of the vase. You just need to match a 1/4" square to the pocket and once you do you will have the correct size ratio.
Step2
Step 2) Once you have sized it properly for the use of 1/4" plywood all the cuts will be done with the same settings.
Step3
Step 3) After the laser has finished all the pieces are assembled, before painting the vase and after painting, the color is whatever color you desire.
Step4
Step 4) After the paint has dried it was time to display the flowers or flower in this case, I did not have fresh flowers on hand ( time of year) so it displayed a felt flower I had made earlier...Enjoy!