![[Laser cut and engrave] Lion Clock](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/31d087b4-f47d-49d0-b61b-6e2f4bed26a8?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Lion Clock
Remix
Instruction
Information
The little lion wall clock is very cute and playful, and the pattern is simple and elegant. It is very suitable for hanging on the wall of a children's room, or in a living room, bedroom, or study. It is a good choice.
This remix is based on
xTool DIY Kit
Instruction
Step1
Take out the black walnut plywood, red oak plywood, sapele plywood, black acrylic and white acrylic from the kit, apply masking tape to all the boards, turn on the machine and connect it to the computer.
Step2
Turn on the computer, import the processing file into xTool Creative Space, set the processing parameters, cut out the designed model, and tear off the masking tape on the surface.
parameter:
Mode:Laser cut
Walunt Plywood,Red oak plywood,Sapele Plywood
Power:70
Speed:6
Frosted BlackAcrylic
Power:80
Speed:5
Pearl WhiteAcrylic
Power:100
Speed:1
Mode:Laser engrave
Power:60
Speed:100
Step3
First, place the black walnut base with the carved traces facing up; then align the black walnut panel, the bristles cut from sapele, and the face cut from red oak with the lines carved on the base, and stick them on the base.
Step4
Align the lines on the base plate and then glue the eyes, mouth, ears and body on.
Step5
Glue the white acrylic numbers and scale strips to the corresponding positions
Step6
Inserting the clock movement
Step7
Install the hour hand, minute hand, second hand, and finally the battery.
Step8
Assembly Complete.
note:
1、Applying a thin layer of wood wax oil on the black walnut board can make the color of the board more advanced and textured.
2、Before using the wooden board for cutting, you can stick masking tape on its surface to effectively prevent the carbonized dust from laser cutting from adhering to the board during the cutting process.
