Cut out. Be very careful this project is a very delicate picture.

Use Resin tape to tap down back of design so resin will not leak out around design then sprinkle glass beads inside of design so it will fill in some of the space and you do not have to use as much resin.

In a small silicone mixing bowl add resin and one drop of alcohol ink and stir then pour in random places. Continue until design is filled with resin. 

Put under UV light until it hardens. Then let sit under sunlight out doors for a couple hours the sit for another 12 hours then it should be set. 

Once you pull off resin tape make sure design does not need to sit under light for about 5 minutes to add shine to the backside of design. 

To the bottom of your design add any saying to the bottom to bring it more to life. You can use laser cut or vinyl to or just leave it like it is so you do not take away from your sun catcher