HomeTemplatesOffice & StationeryDesk Organization
MM
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Notes holder with London city skyline

Instruction
Mini note holder w skyline.xcs
Mini note holder w skyline
.xcs
Application scenario
Laser (20min)
Machine & module
xTool D1 Pro
5W
Material used
4mm
16
334
Information
      This little organiser is interested to hold square sticky notes and can be made using any 4mm thick material. 
I used plain MDF as this is being used in a workshop. Having notes available is always handy for writing measurements and reminders.
Instruction
1
Step1: Design and material
Preview

This design can easily be customised with extra engraving such as pictures or text to make it more personal.


When choosing your material, just make sure it is 4mm thick and this design should work perfectly. 

2
Step2: Cut and engrave
Preview
Preview

These settings are for using a xTool D1 Pro 5w with 4mm MDF.

3
Step3: Assemble
Preview
Preview
Preview
Preview

All parts of this project should tightly slot together with no gluing needed but if you want to be extra sure you can add a little wood glue to the edges during the assembly process.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro

License

CC BY-NC-SA