Report
![[Laser cut and engrave] Engrave Photo Gift on Wood](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ab708e27-a63a-47df-88e1-6879cb2eceb6?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Engrave Photo Gift on Wood](/_nuxt/video_icon.B5w3Xr8w.png){kind=icon}
Engrave Photo Gift on Wood
On Wood Engrave
.xcs
Application scenario
Laser (180min)
Machine & module
xTool S1
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
147
1150
Information
A demonstration of the steps taken on my xTool S1, XCS, and finishing the engraving of an image on a wood surface. The material is wood from Michaels to engrave on. Stand was purchased from there as well. The setting for my final engraving is: for the image 17% power/75 mms(Take your time to allow the laser to work and do not risk over-burning the material) For the text I used 64% power/128mms both at 180 LPI. I hope this helps. leaning forward while working out of the garage.
Comments
