Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
Stained Glass Butterfly Earrings
IMG_2054
.jpeg
Application scenario
Laser (15min)
Machine & module
xTool P2
10W
Material used
3mm Red Acrylic（Opaque,Glossy)
3mm Blood Red Acrylic Sheet
Clear Transparent Acrylic
14
1123
Information
These are earrings made with patterned clear "flex" materials and acrylic. I used 3m double sided tape on the back of the acrylic to stick to the clear flex material. You cannot see the tape when it is put together. The flex is very thin and laser safe.
![[Laser cut and engrave] Stained Glass Butterfly Earrings](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/8a3eee01-c546-4de1-bd41-1f8c2ef40195?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Stained Glass Butterfly Earrings](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
