HomeTemplatesDecorHome Decor
Monolith Engraving
Report
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

4" Pallet Coaster - 3mm Basswood

Instruction
Pallet Coaster 4 inch - 3mm.xcs
Pallet Coaster 4 inch - 3mm
.xcs
Application scenario
Laser (6min)
Machine & module
xTool P2
55W
Compatibles · 10
Material used
3mm Basswood Plywood
307
1743
Information
      A simple wooden coaster, designed to replicate shipping pallets.
Super easy to assemble! No glue needed. 

Red = Cut - Speed 20
Black = Cut - Speed 18
Blue =Engrave
Instruction
1
Step1: Position cut file

These words may be changed and or deleted.

2
Step2: Adjust Power, Speed, and cut/engrave settings

RED = CUT POWER 100 - SPEED 20 - PASS 1

 

BLACK = CUT POWER 100 - SPEED 18 - PASS 1

 

BLUE= ENGRAVE POWER 20 - SPEED 150 - PASS 1 - LPCM 120

3
Step3: Cut and Assemble

After cutting, position the three wide boards parallel to each other. 

Take the three middle supports and carefully snap them into the previously placed boards.

Now attach the two thin faceplates onto the exposed sides.

All that is left is to snap the six top boards.

 

It is a snug fit, so be careful while assembling. 

 

Comments
Remixes
xTool Supplies Used in This Template
xTool P2
xTool P2
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC