HomeTemplatesOffice & StationeryDesk Organization
Thrasher114
Report
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Journal Cover

Instruction
Journal Cover.xcs
Journal Cover
.xcs
Application scenario
Laser
Machine & module
xTool D1
5W
Compatibles · 7
Material used
0.2mm Kraft Paper
53
1234
Instruction
1
Step1: Layout Workspace

The first step is to measure the cover of the journal you are going to use for the project.  Mine is a 5.5 x 4 inch craft paper covered journal.  To help visualize this space in the XCS software, I like to draw a rectangle with the same dimensions.  

2
Step2: Add designs and text
Preview
Preview

Next let's add in some images.  I created an image of a pencil sketched map with a compass rose.  I used the edit tool to remove some edges and helped the image blend in with the design.   I added in text at the top to fill out the design. 

3
Step3: settings

The settings are for the D1 5W laser.  You may need to adjust the settings for your laser configuration.

Be sure to follow all the safety guidelines for your laser and always wear personal protective equipment when the laser is in operation. 

Comments
Remixes
xTool Supplies Used in This Template
xTool D1
xTool D1
0.2mm Kraft Paper
0.2mm Kraft Paper

License

CC BY-NC