Report
![[Laser cut and engrave] Bookmark](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/de831014-c64a-45b7-9429-fae9e4785be9?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Bookmark
Instructionbookmark
.xcs
Application scenario
Laser
Machine & module
xTool D1
5WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
276
1217
Instruction
1
Step1: Start with Simple Designs
Preview
The first step is to build the overall shape of the bookmark. I wanted rounded edges so I used the square with rounded edges in the XCS built-in shapes
2
Step2: Add in Designs
Preview
Next, Import your own design. I used the image trace tool to convert the designs to vectors. I then ungrouped the vectors so I could move the parts around to fit the vertical design of the bookmark.
3
Step3: Settings
The settings are for the D1 5W laser. You may need to adjust the settings for your laser configuration.
Be sure to follow all the safety guidelines for your laser and always wear personal protective equipment when the laser is in operation.
Comments
