HomeTemplatesOffice & StationeryStationery Supplies
Atomm
Report
[Laser cut and engrave] Cork Notebooks
Project made with xTool M1 machine for Laser cut and engrave.

Cork Notebooks

Instruction
Cork Notebooks.xcs
Cork Notebooks
.xcs
Application scenario
Laser
Machine & module
xTool M1
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
38
2348

Instruction

1

Step1

STEP1.Import designing documents and verify the size,processing position and processing mode.

Attention:The documents of pictures are designed by cork notebooks . If the types and thickness of materials you choose are different from that, please adjust the laser processing parameters according to the actual material.


2

Step2

Cork Notebooks instruction: step 2 -
Preview

STEP2. Laser processingPut the cork notebook in the laser machine and ensure that the material is flat，engraving the pattern on the notebook by laser.

Attention:The laser parameters marked here are for the current case. If you like a different effect, please adjust them manually.

Comments

Remixes

xTool Supplies Used in This Template

xTool M1
xTool M1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood