It Blommefamke

Poročilo

[Laser cut and engrave] Cover notebook — Project made with xTool M1 machine for Laser cut and engrave.

Cover notebook

Navodilo

Book cover

.xcs

Scenarij uporabe

Laser (30min)

Stroj in modul

xTool M1

10W

Uporabljeni material

3 mm plywood

1177

8823

Informacije

      I've made a new wooden cover for my notebook. 

This project was inspired by Xtool Spain & Sandra from @pasitoapasitodecorando (instagram).

Book cover

notebook

cover

Navodilo

Korak1: Design

Cover notebook instruction: step 1 - Design

Predogled

First determine the dimensions of your book cover* and then choose a rectangle with the same dimensions under 'shapes'. Then place the harmonica mechanism from my file in the center of the rectangle. Check whether it has the correct width. Adjust this if necessary by removing dashes or adding extra dashes (copy/paste). Then add the desired images and text to your design. I chose a floral pattern from XCS shapes/patterns.

Korak2: Laser

Cover notebook instruction: step 2 - Laser

Predogled

Choose your desired wood and place it in the laser. I used my honeycomb and magnets for this.
I used 3mm plywood from the hardware store*. Choose the settings that best suit your wood. You can test this in advance with a test grid. I chose to score the floral pattern, engrave the text and cut the rest. See the pictures for the settings I used.

*https://www.gamma.nl/assortiment/multiplex-timmerplaat-3-mm-122x61-cm/p/B818520?store=%7Bstore_code%7D&gad_source=1&gclid=Cj0KCQjwztOwBhD7ARIsAPDKnkA13iBlYHpNzTaK1aoaxv6d2arpfLhsSZOSW6aIToBTIPWMKfkr4V4aAjXCEALw_wcB&gclsrc=aw.ds

Korak3: Assemble

Cover notebook instruction: step 3 - Assemble

Predogled

When your cover is ready, you can treat it with a varnish (spray) to keep the cover nice and neat. After it’s dry you can go on with assemble.

Remove the original cover from te notebook (optional). Then you can stick the cover to your (note)book. Use double-sided tape, from Tesa or for example. If desired, you can place a cotter pin on the front and an elastic band on the back, so that you can close your book.

Check the pictures for the end result, or watch my video on www.instagram.com/itblommefamke or www.facebook.com/itblommefamke

* I used a black notebook from a Dutch store called HEMA, price €5,-, for this project.

Komentarji