jennifertenney
jennifertenney
Zgłoś

Small Easter Basket

EasterBasket1.xcs
EasterBasket1
.xcs
Scenariusz zastosowania
Laser (30min)
Maszyna i moduł
xTool D1 Pro
20W
Kompatybilne · 12
Materiał użyty
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
82
1070

Informacja

      Everyone gets a Martha Stewart moment and this was mine! I created a small (6x4") easter basket for each member of my family. All are adults, so just wanted a little something.  Once cut, painted and glued together, I filled them with shredded green paper, added a bit of candy and a tag and set them on each plate for Easter Brunch. They cut out quite quickly.  The colouring takes a bit of time but I use acrylic markers so it can be as detailed as I choose. I also chose to glue them together though you could opt not to by making the slots a bit smaller. A very successful project according to the receivers and it is a great beginner project.
    
Komentarze

Remiksy

Urządzenie xTool użyte w tym projekcie

xTool D1 Pro
xTool D1 Pro
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood

Powiązane kolekcje

Pokrewne tagi

Licencja