
Self-adhesive Vinyl Shimmer Red Shimmer
Просмотреть детали параметров в Studio/XCS
Меры предосторожности при обработке
Wear goggles that match the wavelength of the light source
When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;
After processing is complete, wait until the smoke is cleared before opening the lid to retrieve the part
After processing, do not open the lid immediately. Wait for the smoke exhaust system to run for 10~30 seconds and after the smoke inside the chamber is completely removed before removing the part. Opening the lid immediately will allow unvented smoke or odorous gases to flow directly into the operator's face. Ensure good ventilation and wear a protective mask if necessary.
Проверьте руководства по обработке материалов
Для дерева, металла, акрила и др., а также меры предосторожности во время обработки
Похожие материалы

Самоклеящийся винил черный с блеском

Самоклеящийся винил матовый красный

Самоклеящийся винил глянцевый красный

Самоклеящийся винил глянцевый красный

Самоклеящийся винил Гладкий охристо-красный

Самоклеящийся виниловый голографический радужный холо фуксия

Голографическая самоклеющаяся пленка

Гладкий Самоклеящийся Винил

Самоклеящийся винил серебристый блеск

Самоклеящийся винил зеленый блеск

Самоклеящийся винил золотистый блеск

Самоклеящийся винил черный блеск

Самоклеящийся винил красный блеск

Иридесцентная самоклеящаяся пленка

Самоклеящийся винил розовый блеск

Самоклеящийся винил матовый оранжевый

Самоклеящийся виниловый матовый зеленый

Самоклеящаяся виниловая матовая синяя

Самоклеящийся винил матовый серый

Самоклеящаяся виниловая матовая желтая