bscholz

Blank Commemorative Brass Coins

deep engraving settings for 2mm coin, did same image on each side and it does not go through. Nice detail and depth for images. Z axis .001 every 2 layers. Cleanup every 10 layers at 20% power

MachineF2 Ultra(Fiber IR · 60W)

Processing ModeEmbossment

Processing typeEmboss

Thickness2mm

Settings

Version: 2.0.0

Precautions

Wear goggles that match the wavelength of the light source

When operating with open covers or using open-type devices, be sure to wear laser goggles that match the wavelength of the light source. Different light sources (blue light/infrared/CO2/UV) have different wavelengths; please pay attention to whether the wavelength protected by the goggles matches the laser;

Prevent high-temperature burns after processing

Freshly processed materials and cuts are very hot; please wait for cooling or wear gloves to pick up parts; do not touch them directly.

Did these settings work?No results yet

No one has shared a result yet. Be the first to let other makers know if these settings worked.

Blank Commemorative Brass Coins

Similar Materials