40mm Blank Commemorative Zinc Coins(Grade 0 Zinc)

ME044-01

4mm

F2 Ultra UV

F2 Ultra

F2 Ultra (Single)

F1 Ultra

Laser Power

Processing Mode

Embossment

Processing Type

Emboss

Studio/XCS에서 매개변수 세부정보 보기

파라미터 업데이트 시간: 2026-07-17

선택됨

makeblock-xtool

전문적인 결과 · 즉시 설정 · 30일 무위험

모든 세부사항

수량

처리 주의사항

Highly reflective material

For this material, after proper focusing, it is recommended to place it near the exhaust fan area to improve smoke extraction, heat dissipation, and camera positioning. Applying an anti-reflective treatment (e.g., black marking spray) on the surface can help reduce reflections.

Use odor protection during processing

Processing materials may release strong odors or fumes. A proper ventilation and exhaust system is required to protect the operator's health and reduce the impact of smoke on processing quality.

Prevent oxidation before and after cutting

This material uses laser-induced oxidation on the surface to achieve black, white, or other color effects. However, in high temperature, high humidity, or when wiped with acidic/alkaline substances, the colors may fade or disappear. In such cases, an oxidation protection paste or spray should be applied to preserve the effect.

Be careful of burns from high heat after processing

This material accumulates heat during processing, making the surface very hot. Let it cool down for a while after processing to avoid burns.

Stay close to the exhaust vent

When processing this material (e.g., with F-series devices), place it near the exhaust fan after proper focusing. This helps with smoke removal, cooling, and camera positioning.