Signaler
![[Laser cut and engrave] School Checklist](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f847c4c4-97aa-4eef-8975-14e6817eddd2?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] School Checklist](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] School Checklist](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f847c4c4-97aa-4eef-8975-14e6817eddd2?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] School Checklist](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/382e5ed9-9455-4c58-8146-1fbcba8bc87e/20240818_155816(0) (Small).jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] School Checklist](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/ead572e6-ca91-4cb1-91c3-b85a4a23452e/20240818_155827.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] School Checklist](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e2c393a2-0d83-47ad-9640-df1acd60f00e/20240818_155827.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] School Checklist](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/70bee60e-1643-46d9-846a-ef1e9c9e9ef5/20240818_155816.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] School Checklist](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/6eedd3d1-58ba-4302-b5ac-32fb31de215b/20240818_155816(0).jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] School Checklist](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/dea08865-abb1-4be5-9fc5-ccf334f31b4c/20240818_155844.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
School Checklist
Instruction
hanger and foot back
.xcs
Afficher 3 de plus
Scénario d'application
Laser (45min)
Machine et module
xTool S1
40WMatériau utilisé
3mm plywood
3mm Plywood
3mmm plywood 12" x 12"
116
2202
Information
This is a wooden checklist to make sure you children have what they need before going out the door. It is made out of 3mm plywood, card board. There are 3 layers of plywood and a layer of cardboard to add space for the answers to slide.
Instruction
1
Étape1: Cutting out the front can be done on a pre painted piece of 3mm plywood. Settings will need to be tested for MDF
.jpg?x-oss-process=image/resize,m_fill,w_1500,h_1125,limit_0/interlace,1/format,webp/auto-orient,1)
Aperçu
The Check list front also has the slides on that panel.
2
Étape2: middle and back
The middle piece and back pieces are cut from a 12" x 19" piece of 3mm unfinished Plywood. Once cut out they can be glued together.
3
Étape3: Cardboard filler layer
The cardboard layer is a filler so the answer slide move freely. The setting I used were for a cereal box.
4
Étape4: final assembly
Aperçu
With the back and center piece glued together, wax the slide pieces and put the slides place. Then glue the cardboard filler and front on. I also included a file for a hanger and feet to glue on the back.
Commentaires
