Сообщить
![[Laser cut and engrave] Accuracy](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b76f3bd5-7760-4da9-b119-1975b07eb0ea?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Accuracy](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Accuracy](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b76f3bd5-7760-4da9-b119-1975b07eb0ea?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Accuracy](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/7c87fb18-eaec-45f3-af3c-56b53553e45b/hqdefault.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Accuracy
Инструкция
accuracy
.ai
Сценарий применения
Лазер (1min)
Машина и модуль
xTool D1 Pro
20WИспользуемый материал
1/8"(3mm) Basswood Plywood
34
750
Информация
this is HOW TO Increase accuracy
Инструкция
1
Шаг1: engrave this dot on the side
engrave this dot on the side
2
Шаг2: make sure everything is square
make sure everything is square
3
Шаг3: put the fire button at 2% power and press fire
put the fire button at 2% power and press fire
4
Шаг4: line up with the dot and then start the job
line up with the dot and then start the job
5
Шаг5: this is gonna make sure to have 1000% accuracy
this is gonna make sure to have 1000% accuracy
Комментарии
