1/8"(3mm) Black Glitter Acrylic

AC107-01

3mm

Inflammable

F2 Ultra UV

F2 Ultra

F2 Ultra (Single)

P2S

M1 Ultra

F1 Ultra

F1 Lite

D1 Pro

D1 Pro 2.0

Laser Power

10W

Processing Mode

Process on baseplate

Processing Type

Score

Afficher les détails des paramètres dans Studio/XCS

Heure de mise à jour des paramètres: 2026-07-17

Sélectionné

makeblock-xtool

Résultats professionnels · Configuration instantanée · 30 jours sans risque

Tous les détails

Quantité

Précautions de traitement

Flammable material

This material is flammable under laser equipment. Close monitoring is required during processing to prevent fire.

Remove protective film before processing

This material usually comes with a protective film to prevent surface damage during transport. Remove the film before laser processing to avoid ignition and damage to the acrylic.

Clean the material after processing

During processing, this material may generate dust or other substances that remain on the surface. To improve appearance and functionality, clean off carbon residue, slag, or oxide layers using water, alcohol, ultrasonic cleaning, or specialized cleaners.

Use odor protection during processing

Processing materials may release strong odors or fumes. A proper ventilation and exhaust system is required to protect the operator's health and reduce the impact of smoke on processing quality.

Turn on air assist (gas pump)

Air assist provides a strong airflow to remove debris and smoke. Surface discoloration is caused by the buildup of heat and smoke. Using air assist helps cool the material, prevent burn marks and color changes, and improve cutting speed and performance.