Seashell Wooden Wedding Table Numbers or Home Decor

ID 196188

Atomm Exclusive

Instrução

Arquivos

Arquivos originais

AutorM1 Ultra · 1/8"(3mm) Basswood Plywood, 1/8"(3mm) Walnut Plywood

Adicionar Perfil de Fabricação

Mesmo design, máquina, material ou qualquer melhoria diferente · Ganhe 100 Créditos

Dicas para criar um ótimo Perfil de Fabricação →

787

Informação

      Beach boho themed wedding table number in the shape of a seashell. The project can be repeated for as many table numbers as needed.
The numbers are optional, you can use this project to create beautiful beach or nautical themed home decor.
Project has been made using the xTool M1 Ultra, on 3mm basswood and walnut, pieces are glued together to the thickness of your choosing, including the base, extra rectangle for added support and the design (optional table numbers).

Instrução

Etapa1: Open file and read the instructions

When you open the .xs file, you will notice the first Canvas is the instructions. Please read and test your material settings prior to starting.

Etapa2: Process the pieces based on the wood material

Seashell Wooden Wedding Table Numbers or Home Decor instruction: step 2 - Process the pieces based on the wood material

Pré-visualização

The project has been separated based on the wood material being used.

You can add or remove components based on the design combination you'd like.

For each sign, we recommend using:

1 rectangle base support piece
1 solid back piece
2 seashell design pieces

The main table number sign will be 9mm thick, with an additional back base so that the bottom portion is 12mm thick

Etapa3: Glue pieces together

Seashell Wooden Wedding Table Numbers or Home Decor instruction: step 3 - Glue pieces together

Pré-visualização

Use your preferred wood glue to adhere the pieces together. Use clamps/bulldog clips to keep the pieces in place while glue sets. The time for the glue to set depends on your product.

When gluing the numbers on the front, you may not be able to use clamps, you can place a heavy object (eg. a book) on top of the sign while the glue sets.

The final piece to add is the additional rectangle base support, a clamp/bulldog clips can be used for this.

Comentários