Stackable Storage Base

Included Parts

Bottom panel

Front panel

Back panel

Left side panel

Right side panel

Center divider

Assembly Instructions

1. Dry Fit

Before gluing:

Insert all panels together without adhesive.

Ensure all tabs fully seat in their slots.

Confirm the box sits square on a flat surface.

Light sanding may be needed if the fit is tight.

2. Assemble the Outer Frame

Apply wood glue to the tabs and slots of one side panel.

Insert it into the bottom panel.

Attach the front and back panels.

Install the second side panel.

Make sure all edges are flush.

3. Install the Divider

Apply wood glue to the divider tabs.

Slide the divider into the center slots.

Ensure the divider sits straight and fully seated.

4. Clamp Using CA Glue Trick

To clamp instantly:

Apply a small drop of CA glue along the outer seam.

Press the joint together for 5–10 seconds.

The CA glue locks the parts immediately, while the wood glue cures for a permanent bond.

This eliminates the need for clamps.

5. Final Check

Wipe away excess glue.

Ensure the base sits flat.

Allow 30–60 minutes before heavy use.

Usage

This base is designed to hold stackable bins and store items that you may not need immediate access to.

Perfect for:

Spare parts

Craft supplies

Laser offcuts

Workshop accessories

Stack your bins on top to create a clean modular storage system.