Report
![[Laser cut and engrave] Kaffeekapselhalter aus Holz für die Wandmontage](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/b451347a-be7a-404d-9eb8-a481e558faee.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Kaffeekapselhalter aus Holz für die Wandmontage](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Kaffeekapselhalter aus Holz für die Wandmontage](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/b451347a-be7a-404d-9eb8-a481e558faee.png?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Kaffeekapselhalter aus Holz für die Wandmontage](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/98ae0321-4268-4675-9546-0b978d812038.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Kaffeekapselhalter aus Holz für die Wandmontage](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/c880dabe-a5e4-4585-9784-8b684b2d5522.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden coffee capsule holder for wall mounting
Lucky Prize in Coffee Organizer Contest
Instruction
Kaffeekapselspender
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool S1
40WCompatibles · 9
Material used
1/8"(3mm) Aspen Plywood
59
794
Information
To store our coffee capsules neatly, I created this capsule dispenser. This gives us space for about 40 capsules and it also looks appealing.
The capsules are filled in at the top and can be removed in the middle.
Instruction
1
Step1: Laser all parts
Preview
Preview
Preview
- red lines: cut
- green lines: line engraving
- black lines: engrave
attention the middle part contains very thin struts that can easily break!
2
Step2: Glue middle part to top
Preview
Preview
- The thin rails are glued to the line engraving of the upper part with wood glue and fixed. I used small brackets for this.
- Make sure to glue the strips exactly so that the capsules slide down afterwards!
3
Step3: Assembly
Preview
Preview
- The pieces glued together from step 2 are now glued to the bottom part. Again, make sure that the parts are as close as possible to the engraved template!
- So that nothing slips weigh down with an object. I like to take my batteries with it.
When everything is dry, fill with the capsules.
Have fun imitating them!
Comments
