cwo.hobart
cwo.hobart
Report

"Welcome Home" Bluebird House, Wooden Laser Cut and Engraved with acrylic entrance

Bluebird House.xcs
Bluebird House
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40W
Compatibles · 13
Material used
1/8"(3mm) Basswood Plywood
21
395

Information

      We love watching our Bluebirds during spring and summer.  Created this Bluebird Home for our Bluebirds when they return in the spring.  Easy to make and it is a great gift.
    

Instruction

1

Step1: Cutout and Assembly the House

"Welcome Home" Bluebird House, Wooden Laser Cut and Engraved with acrylic entrance instruction: step 1 - Cutout and Assembly the House
Preview
"Welcome Home" Bluebird House, Wooden Laser Cut and Engraved with acrylic entrance instruction: step 1 - Cutout and Assembly the House
Preview
"Welcome Home" Bluebird House, Wooden Laser Cut and Engraved with acrylic entrance instruction: step 1 - Cutout and Assembly the House
Preview

https://www.facebook.com/profile.php?id=61551020757390&__cft__[0]=AZZRiGD2Xe46DGwtasF4TrBjjDSo7SCZxmVPh8cEghBNjQk-nUTwsfQqYsAMvNIXpqAgMzq4HLa8bzjXZRzA9s44dnzxb2gQlu2AoU7TAS8-0O1OYz4BMHVNqOBZBzAt1FN0jez8r3fIBIyTPA1elQ6RhtqNfGQlW9YUpLxUuDWuIQ&__tn__=%3C%3C%2CP-R

  1.   Start by cutting out the parts on canvas2, canvas3 and canvas4
  2.   Setting are shown in the above canvas 2 - 4
  3.   Glue the parts together (Add the Roof while gluing)
  4.   Note:  Do not get glue on the Roof, it need to be free in order to clean the house
  5.   After the house dries lightly sand
2

Step2: Cutout and Assembly the Letters and Flowers

"Welcome Home" Bluebird House, Wooden Laser Cut and Engraved with acrylic entrance instruction: step 2 - Cutout and Assembly the Letters and Flowers
Preview
  1.   Cutout the “Welcome Home” and flowers
  2.   Painting the cutouts is your choice
  3.   Once dry glue the cutouts on the house
3

Step3: Final Recommendation

  1.   I recommend a coat or two of sealer, it will be outside
  2.   Additionally I adder an acrylic entrance to keep the edges from being chewed up

 

Have Fun…

Comments

Remixes

xTool Supplies Used in This Project

xTool S1
xTool S1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

Related collections

Related tags

License

This work contains AI-generated content.