6 Drawer Compartment with Doors

Choose Your Wood:

• Select 1/8” mahogany plywood for the project.

Load the Creative Space Project File:

• Open the project file in xTool's Creative Space software.

Prepare the Laser:

• Load the mahogany plywood into the laser machine.
• Adjust the laser focus to ensure optimal cutting and engraving depth.

Set the Marking Area:

• Define the marking area within the software to match the dimensions of your plywood.

Cutting Process:

• Using the Creative Space software, proceed to cut all the pieces for the project, organized by Base, Drawers, and Inserts.
• You can cut these pieces in any order that suits your workflow.

Organize the Pieces:

• After cutting, organize the pieces into their respective groups: Base, Drawers, and Inserts.
• Lay out all the pieces on a flat surface as shown in the provided pictures.
• This visual organization will help you understand how all the pieces come together in the assembly process.

Clean Residue:

• Remove any residue or debris from the laser cutting process using a soft cloth or brush.
• Ensure all pieces are clean and free from any obstructions.

Assembly:

• Assemble all 6 drawer boxes.
• Assemble the base and add the inserts

Perform Dry Run:

• Before gluing, conduct a dry run by assembling the pieces together without adhesive.
• Use painter's tape to temporarily hold the pieces in place.
• Verify that all pieces fit nicely and that no components are missing.
• This step allows you to ensure proper alignment and fit before applying glue.

Prepare Glue:

• Choose a CA glue (cyanoacrylate adhesive) for bonding the pieces together.
• Prepare the accelerator spray for expediting the gluing process.

Sand and Smooth:

• Use fine sandpaper to sand the corners of the assembled project.
• Remove any excess glue that may prevent the drawers from operating smoothly.
• Ensure all rough spots are smoothed out for optimal functionality.

Check Alignment:

• Double-check that everything is aligned correctly and that the drawers and doors function smoothly.

Apply Finish:

• Choose a wipe-on water-based polyurethane finish for the project.
• Apply the finish evenly across the surface of the project using a soft cloth or brush.

Allow Time to Dry:

• Allow sufficient time for the finish to dry completely according to the manufacturer's instructions.

Enjoy Your New Project:

• Once the finish is dry, your 6-drawer shelf with doors made from mahogany plywood is ready to be enjoyed!
• Admire your craftsmanship and the functionality of the finished piece.