![[Laser cut and engrave] Egg Carton](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/fb884a1c-6164-4276-8e32-5a779e29c723.png?x-oss-process=image/resize,m_fill,w_1280,h_960,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Egg Carton](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/fb884a1c-6164-4276-8e32-5a779e29c723.png?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Egg Carton](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/ed3ca4e2-4eaa-4a3c-b848-7ba9b97376e2.png?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Egg Carton](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/3fbd1396-82a0-40f7-80c7-b98560b3965b.png?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
Egg Carton


Information
I created this piece by layering wood to achieve the classic egg carton design. You can use this to hold Easter eggs, candy, or use as a desk organizer.
Instruction
Step1: Process Material

https://www.facebook.com/share/p/18HDNKXbpd/?
This project uses 3mm walnut plywood, but any 3mm material will work. Just make sure to adjust your setting if you use a different material. Purple lines are cut and blue lines are score. Process your material. You are going to have a lot of circle pieces, so I recommend organizing them by size to make assembly a little easier.
Step2: Assmeble



You are going to start with the solid circles that have a score line. Glue on the next bigger size ring using the score line as a guide. Continue with each ring until you have 6 “cups”. The top ring will not have a score line. Now, take the next piece that has 6 holes with score lines as shown in the image. Turn each cup upside down and glue in place using the score marks. Once that is done, turn it right side up and glue the next 4 pieces in place. The image shows the order in which you will need to glue them. They all line up by the hole cutouts. The top 2 layers look very similar. The top piece is slightly smaller, so make sure you glue them in the correct order. Now glue the 4 middle pieces in place with the 2 smaller pieces on top. They each line up with the hole cutouts as well.
Step3: Finish

Finish your piece with a clear coat or polyurethane of choice. You can now fill your egg carton with Easter eggs, candy, or use as an organizer. Enjoy!
Remixes
You may also like

"Woven Easter Basket" Kids Easter Egg Basket, Laser Cut & Engraved with a Weave Pattern

Easter Egg Basket SVG Laser Cut Easter Basket Holder Wooden Easter Basket File

Easter Basket

Wooden Easter Egg Featuring a Cute Baby Chick Illustration

The Great Easter Hunt Basket & Clue Set

Easter Egg Holder with Bunny and Chick Design Laser Cut. Wooden Table Decor. Spring Design. Happy Easter

Glass Jar with Easter Bunny and Egg Laser Engraving
Easter Basket
3D Easter egg baskets bundle laser cut. Wooden egg stand. Easter egg storage. Easter egg holder SVG. Happy Easter svg. farmhouse svg

Laser Cut Wooden Chicken Egg Holder with Floral Design

Easter Egg Box

In Case of Emergency Break Glass Creme Egg Display Case for Easter

Easter Basket
Easter Egg Dispenser / This Chicken lays eggs

The Bunny's Banker Wooden Investment Hollow Carrot Bank Investment Lesson

Easter egg box and puzzle



