cwo.hobart

Report

[Laser cut and engrave] Laser Cut Wooden Coffee Alarm Emergency Box with Glass Front — Project made with xTool S1 machine for Laser cut and engrave.

"Instant Coffee Storage" Laser Cut Emergency Coffee Box with Engraved Acrylic Front

Coffee Organizer Contest

Instruction

Emergency Coffee

.xcs

Application scenario

Laser processing

Machine & module

xTool S1

40W

Compatibles · 13

Material used

1/8"(3mm) Basswood Plywood

1/8"(3mm) Green Translucent Acrylic

1/4"(6mm) Birch Plywood

160

Information

      This is storage for that instant coffee we never use "Emergency Only" and it works by getting it off the counter.  Besides storage it is a great conversation piece. The box is 1/8" Bass Plywood and the glass is 1/8" Green Translucent Acrylic (My First Published Acrylic Project with colored acrylic).

coffeeorganizercontest

Instruction

Step1: Gather, Cut and Engrave Materials for the Box

Preview

You will need 1 sheet of 12" x 12" Bass Plywood for the box
The layout is shown and setup in the above screen shot for you
The setting are also shown in the above screen shot

Step2: Gather, Cut and Engrave the Acrylic

Preview

This was my first Published Project using acrylic, so the setting could be better
It took 3 passes to cut the Green Translucent Acrylic, setting are shown in the screen shot above
NOTE: I used the cutting setting shown above to get a the engraved look, it worked better for me. This may not be the correct way, but worked for me.