Report

Whiskey Glass with 'You're Neat' Text and Ice Cube Icon

ID 90783
Instruction
Files
Original files
AuthorD1 Pro · 3mm Clear Soda-Lime Glass
1
Preview
Preview
Preview
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 50 Credits
Tips for a great Make Profile →
gift
56
1766

Information

      Serve up a compliment with his favorite pour. 🥃

Whether he likes his bourbon straight up or on the rocks, tell him exactly how you feel with this "You’re Neat" whiskey glass. Featuring a clever play on words and a classic aesthetic, this glass is the perfect blend of humor, sentiment, and style.

It makes the ultimate gift for the guy who has everything—perfect for Valentine’s Day, your Anniversary, Father’s Day, or just to stock the home bar.

Why He’ll Love It:

The Pun: A witty way to say "I think you're awesome" using whiskey terminology.

The Design: Features a bold, masculine slab-serif font and a clean line-art icon of a whiskey tumbler.

Bar Cart Ready: This isn't a novelty item that hides in the cupboard; it looks classy enough to sit front and center on the top shelf.

Perfect For:

Valentine's Day gifts for him

Anniversary present for Husband or Boyfriend

Father’s Day gift for Dad

Groomsman Proposal or Best Man gift

Stocking stuffer for Whiskey, Scotch, and Bourbon enthusiasts
    

Instruction

1

Step1

Note: Since glass is transparent, standard diode lasers (like the D1 Pro or S1) pass right through it without marking it. You must "mask" the glass first. If you are using a CO2 laser (like the P2), you can often engrave directly, but masking still helps prevent micro-fractures (chipping).

Preparation & Masking

  1. Clean the Glass: Wipe the glass down with isopropyl alcohol to remove fingerprints and oils.
  2. Mask the Glass (Crucial for Diode Lasers):
    • Method A (Best for Diode): Spray the engraving area with Cold Galvanizing Compound (a spray paint found at hardware stores) or black tempera paint/chalk spray. The laser heats the pigment/metal, which transfers heat to the glass to create the fracture.
    • Method B (Best for CO2/P2): Wet a single layer of paper towel and smooth it over the glass (no air bubbles). This keeps the glass cool and prevents shards from chipping off.
  3. Install the Rotary Attachment:
    • Plug your RA2 Pro (or similar rotary) into the machine.
    • Set it to Chuck Mode (gripping the glass) or Roller Mode (resting the glass), depending on the shape. For a straight-walled whiskey glass, Rollers are fine. If it tapers or is heavy, Chuck mode is safer.
    • Tip: Use the leveling tool (the little spirit level) to ensure the surface of the glass is perfectly flat horizontally. If the glass is tilted, the laser focus will drift.
2

Step2

xTool Studio Setup

  1. Connect & Select: Open XCS and connect your machine. Select "Laser Cylindrical" mode on the right-hand panel.
  2. Input Diameter: Measure the diameter of your glass (in mm) and enter it into the software so the rotary spins at the correct speed.
  3. Import Design:
    • Import your "You're Neat" .xcs file.
    • Rotate the design 90 degrees if necessary (depending on how your rotary is oriented—usually the top of the glass faces left).
  4. Settings (Starting Point):
    • These vary by machine wattage, but here are safe starting points for a 10W Diode:
    • Power: 100%
    • Speed: 50–70 mm/s
    • Lines per cm (LPC): 100–120 (Too high causes heat stress/cracking; too low looks faint).
    • For CO2 (P2): Lower power (15-20%) and higher speed (150+ mm/s) is usually sufficient.
3

Step3

Focusing & Framing

  1. Focus the Laser:
    • Move the laser head over the highest point of the glass curve.
    • Use the kickstand lever (D1/M1) or the auto-measure (P2) to set the focus distance right on top of the glass surface.
  2. Framing:
    • Click "Framing" in XCS.
    • Watch the laser head move and the glass spin.
    • Ensure the design isn't hitting the heavy rim at the bottom or the lip at the top. It should be centered in the clear area.
4

Step4

Engraving & Cleanup

  1. Run the Job: Put on your safety goggles (glass reflects laser beams!) and hit "Start."
  2. Cool Down: Let the glass sit for a minute or two after the job finishes. It will be hot.
  3. Remove Masking:
    • Take the glass to a sink.
    • Use a scouring pad (like a green Scotch-Brite) or a "Magic Eraser" with water to scrub off the paint or galvanizing spray.
    • Note: The paint might look stubborn, but the laser has permanently etched the glass underneath. Once the paint is gone, you will see the frosted white look.
5

Step5

Quality Check

  • Check for "Shards": Run your finger gently over the engraving. If it feels extremely rough or sharp like sandpaper, you may have used too much power or too slow a speed (causing deep fracturing).
  • Solution: lightly sand the engraving with high-grit sandpaper (2000 grit) or steel wool to smooth it out for the customer.
Comments