![[Laser cut and engrave] Laser Engraved Wooden Coffee Cup Coaster with Mountain Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/a8d641e6-0e51-4a6f-90b4-8abb05c9270f.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Wooden Coffee Cup Coaster with Mountain Design](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Laser Engraved Wooden Coffee Cup Coaster with Mountain Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/a8d641e6-0e51-4a6f-90b4-8abb05c9270f.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Wooden Coffee Cup Coaster with Mountain Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/bf591c15-55b7-4e15-a212-eb04b5afef50.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Engraved Wooden Coffee Cup Coaster with Mountain Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/d74b705c-6578-4e1d-bdc7-f4cdbde94940.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Embossed Coin Wooden Coffee Coaster
Coffee Décor Contest 
Instruction
Information
This is a wooden coaster, inlaid with an embossed coin that has an image inspired by nature and a love of coffee. The inset design of the coaster keeps mugs and cups from easily slipping off.
Instruction
Step1: Emboss the blank coin
Place the blank coin into the machine. Align the design onto the coin. Apply the following settings to emboss the design:
Laser type: Fiber IR
Layers: 256
Power: 100%
Speed: 625 mm/s
Pass: 1
Lines per CM: 200
Engraving angle: 75
Apply the following settings for the clean-up phase, set to “engrave”:
Laser type: Fiber IR
Power: 20%
Speed: 4000 mm/s
Pass: 3
Lines per CM: 200
Process the coin.
Step2: Cut the wood
Place desired wood into the machine. Align the cut design onto the wood. Set to "cut" with the laser set to “blue light”. Pick material and apply stock settings. Process the wood.
Step3: Assemble
Align pieces with the full circle on the bottom, the large circle with the coin-sized hole in the middle, and the thin circle on the top. Glue pieces together and clamp. Once dry glue the coin into the coin slot in the middle. Once dry the coaster is ready to use.
