.jpg?x-oss-process=image/resize,m_fill,w_240,h_240,limit_0/interlace,1/format,webp/auto-orient,1)
Report
![[Laser cut and engrave] Laser Engraved Coffee Canister with Bear and Mountain Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/664e2d42-9f21-45f9-8eda-eb3f9fd4a4ab.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Engraved Coffee Canister
Instruction
20260115_111215(1)
.jpg
Application scenario
Laser processing
Machine & module
xTool M1
10WMaterial used
Metal Canister
3
Information
This project is for engraving a metal coffee canister. We live in the mountains of Virginia and enjoy seeing the black bears.
Instruction
1
Step1: Set up your RA2 with rollers
Use auto measure with the red dot in the center (highest point) of your canister. I use tape to cover the canister first and frame the area to make sure that everything is lined up correctly.
2
Step2: Process and clean
Remove your tape without moving the canister. Hit start to begin the engraving process. After it's complete, use dish soap and a magic eraser to clean the canister. Your image should be shiny metal.
Comments
