Report
![[Laser cut and engrave] Touch Wood](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3bf3f5f0-7141-4bf8-a444-6cc6c777cf95?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Touch Wood](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Touch Wood](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3bf3f5f0-7141-4bf8-a444-6cc6c777cf95?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Touch Wood](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/0c2ebe7c-13cb-4c64-bd5e-6a5dd5f3c019/IMG_7358.HEIC?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Touch Wood
Instruction
touch wood
.xcs
Application scenario
Laser (3min)
Machine & module
xTool P2
Compatibles · 14
Material used
32oz(950ml) Blue Insulated Water Bottle with Chug Cap
Cherrywood Plywood
16
461
Information
Do you ever need good luck? A few years ago we were trying to buy our first house. Everytime I saw something wooden I'd touch it and whisper 'touch wood' in the hope that we could get our dream house. In the end I decided that I would make a little 'touch wood' keyring to always have with me when I needed it. It worked!!
Instruction
1
Step1: Placement
Preview
Make sure you choose the correct settings for the material you want to make the keyring out of. I used 4mm cherry veneer.
Place the design over where you want it to be cut on the material.
Orange is cut
blue is engrave
2
Step2: Add findings
Preview
Once the keyring is cut, add your own findings. I went with a keyring but you could add string if you wanted.
A nice and simple project that could be aded to craft stalls
Comments
