Laser Cut Geometric Deer Wooden Table Ornament

Step 1: 
Glue the two identical wooden base pieces together. Ensure the long slots in both pieces are perfectly aligned to create a single, deep channel.

Step 2: 
Take the solid rectangular base panel and the open frame panel. gluing them in place. Ensure the outer edges of are perfectly aligned to create a solid, uniform base structure.

Step 3: 
Flip the base assembly from Step 2 upside down. Glue the two small, square wooden feet onto the bottom surface, placing one at each end of the base.
This will raise the base slightly and provide stability.

Step 4: 
Take the slotted strip you assembled in Step 1 and place it into the open rectangular recess of the base assembly. Ensure it fits snugly inside the frame and sits flat, creating the final slot for the deer to stand in.

Step 5: 
Finally, take the main deer arch panel shown in and slide it vertically into the slot you just created on the base. Push it down gently until it sits flush and secure. Your geometric stag is now fully assembled and standing tall.

THANKS. IT'S DONE. Now you can relax, this is the only buck you’ll ever make that doesn't require hard work! 🦌💸