Mini Star Wars Y-Wing star fighter

layout all pieces to make assembly easier

Glue top canopy to the main body

Glue and insert the three main cabin pieces.

glue the bottom two pieces on.  The canopy pieces will stick thru the two bottom pieces

The gun goes on top of the canopy.  Glue the smaller thin piece with the horizontal pieces 

sticking out the sides and then glue the turret on top.  It makes the gun raised a little.

Glue the long stick on woof in the hole behind the canopy. Then glue the ring piece on.  

the tabs should be sticking out to the sides (perpendicular) of the ship.

This makes the droid..

assemble the engine mounting section first. glue the three pieces that make up the back of the engine mount.

Slide this into the U shaped piece that has the cutout on top.

Slide the U shaped piece on to the engine mount into the slot on top of the other U shaped piece.

Glue in the last two ring sections of the engine to the two U shaped pieces.

The piece with the crosshairs goes into the back end first.

I'm a nut for alignment so I made the last piece with the 1 line going vertical on both sides.

I would make sure they both have the same alignment when you glue them on.

Glue the engines on to the body as shown.

Once its dry put on the display stand

You are done!