Football (Soccer) wall hanging

To start make sure you add your personalisation. There is room for the logo, the coaches name, team name and players names. Once you have added these ensure that the cut and engrave are set to  the correct setting for the thickness of wood used. I used 4mm cherry veneer.

I cut the darker wood first and then the lighter. 

Add the logo to the front of the football. Place onto the material and cut/engrave. Remove from the laser

Place a lighter coloured wood in for the backing of the football. Ensure it is place correctly over your material and cut out.

Using wood glue glue the front of the project to the backing.

Once dry, turn the project over and glue a wall hanging to the back, These were purchased off a large online retail outlet. 

Your design is ready to give to the new owner!