Report
![[Laser cut and engrave] Set of Modern Black and Silver Metal Wood Cufflinks](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/9a44d1c8-77b5-43a9-ac8e-2f65cfbfa704.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Material Spacer Used With xTool Honeycomb Material Pins
Instruction
Material Spacer
.xcs
Show 4 more
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
4
48
Information
Material Spacers to help reduce laser burn/flash on the bottom of projects.
Instruction
1
Step1
After cutting the project pieces I used CA glue to join two pieces per spacer. I would recommend sliding the first piece onto the magnet putting a dab of glue then spraying the second piece with the accelerator then sliding it on top of the first piece. This will ensure alignment.
Comments
