Report
![[Laser cut and engrave] Laser Cut Wooden Marker Organizer Rack for Art Supplies](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/58e3446b-e746-4a97-bdb4-ac3815375e9a.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Laser Cut Wooden Marker Organizer Rack for Art Supplies
Instruction
15-Tier Horizontal Marker Holder
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
4
175
Information
This design can store up to 300 standard sized (6.5 inch) double-tip acrylic markers. Ditch the bulky binders and cardboard cases that the markers came in. Level horizontal storage prevents your double-tip paint markers from drying out on one end (as opposed to vertical storage).
Instruction
1
Step1
Assembly instructions:
Step 1 : Place together back, top, bottom, and 1 side ensuring all corners are square before applying glue.
Step 2 : Place up to 14 shelves using the designated notches on the side panel.
Step 3 : Place the final side panel on lining up the notches with the shelves, top and bottom panels.
Step 4: Secure in place with your preferred craft glue (I prefer Loctite)
Comments
