Report
![[Laser cut and engrave] Twine Holder and Dispenser](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/cc2ce451-a2f6-4770-8980-9c426e7c4aa3.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Twine Holder and Dispenser
Twine Holder and Dispenser
.xcs
Show 3 more
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
2
47
Information
Keeps twine reel from unwinding. I use twine for my signs. I can now just pull the length I need then cut. Original box was created in XCS using Box Generator.
I used CA glue on the bottom and sides. the kerf on top is tight enough to hold and be able to open and close as needed.
Comments
