Report
![[Laser cut and engrave] Laser Engraved Electric Guitar Body with Intricate Paisley Design](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/fe5c2539-3098-4273-82c9-b7100cbd13e9.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
First guitar project
Instruction
IMG_1446
.png
Application scenario
Laser processing (139min)
Machine & module
xTool P3
80WMaterial used
1/8"(3mm) Basswood Plywood
1
13
Information
Fella came to me at a craft show like my work. Wanted me to do a guitar and this is the product that was created using the P3. Masking the guitar. Using 8 power and 300 speed.
Instruction
1
Step1
Preview
Was asked to do a guitar. Overlap the guitar and the pattern. Using AI. That took the majority of time, sizing it and getting the correct pattern. Doing a demo on 1/8 inch plywood after painting it. It showed that the image was correct the speed power seem to work well. Masking guitar. Using the P3. At a power of 8 and speed of 300 approximately just a little over 2 hours. And that was the above worked great.
Comments
