Report
![[Laser cut and engrave] Laser Cut Wooden Banff National Park 2025 Ornament with Wildlife Scene](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/a54431b3-1f0a-4e47-b1f4-63ed07c81ef5.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Laser Cut Wooden Banff National Park 2025 Ornament with Wildlife Scene
Instruction
Banff Ornament
.xcs
Application scenario
Laser processing
Machine & module
xTool D1 Pro
20WCompatibles · 13
Material used
1/8"(3mm) Walnut Plywood
1/8"(3mm) Cherry Plywood
7
Information
I used 3mm Cherry for the back layer and 3mm Walnut for the front layer to add a little more contrast.
I also used spray adhesive on the front layer so each small section would be glued to the back layer.
Instruction
1
Step1
I used 3mm Cherry for the back layer and 3mm Walnut for the front layer to add a little more contrast.
I also used spray adhesive on the front layer so each small section would be glued to the back layer.
Comments
