Report
![[Laser cut and engrave] Laser Cut Wooden Cross Pendant Necklace with Black Inlay](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/70592759-6c56-45f4-812d-e1828769e288.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Laser Cut Wooden Cross Pendant Necklace with Black Inlay
cross with inlay (Black acrtlic and basswood)
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
10WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
2
Information
With the M1U I had 100% at 2 speed and there is a backing on this so you will make 2 crosses one with a cutout and one without.
Comments
