Report
![[Laser cut and engrave] Wooden Spiral Candle Holder](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3f2a5d66-9f4a-4ce5-8382-9cea68156c0d?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Wooden Spiral Candle Holder](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Wooden Spiral Candle Holder
Instructioncandle holder base
.xcs
Application scenario
Laser (30min)
Machine & module
xTool D1 Pro
5WCompatibles · 4
Material used
Barbie Pink Stainless Steel Tumbler with Handle (24oz)
Walnut Plywood
3mm MDF Board
576
3151
Instruction
1
Step1: Cut and engrave the file
Preview
Preview
Preview
Preview
You will need both 3mm and 4mm material to assemble this project correctly.
The vertical slates and top circular surface should be cut from 3mm material while the bottom circle that includes the engraved text along with the 4 internal support pieces should be cut from 4mm material.
2
Step2: Assemble the candle holder
Preview
Preview
Preview
Start by assembling the base using the 2 large circles and the 4 small support pieces to hold them together.
No glueing should be needed but can be used to add extra strength if required.
Once the base is assembled the slats should simply slot into place. Just be careful to attach them in the right order, starting with the smallest and finishing with the longest.
Comments
