Report
![[Laser cut and engrave] Laser Cut Wooden Christmas Tree Decorations Set](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/a0438192-b773-407b-bf0c-18f7ec832ae6.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Minimalist Christmas Trees – Laser Cut Decoration (2 Sizes)
Instruction
Minimalist Christmas Trees
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55WCompatibles · 8
Material used
1/8"(3mm) MDF Board
1
18
Information
This project features two minimalist Christmas trees, based on the same design and offered in two different sizes.
Clean, simple, and modern, they are perfect as small Christmas decorations for a desk, shelf, or festive table setting.
The design was created for 3 mm MDF, but it can also be made with other materials such as plywood or acrylic as long as the thickness remains at 3mm (otherwise, the design will need to be adapted)
If you change the material, simply adjust the laser power and settings accordingly.
Instruction
1
Step1: Laser Cutting
Preview
Cut all parts using a laser cutter. Material used: 3 mm MDF.
You may use other materials, but make sure to adapt speed and power settings.
Keep the material thickness at 3 mm for proper fitting.
2
Step2: Assembly
Preview
Preview
Insert the tree into the base.
The base includes a slightly tight slot engraved to help tou place the glue and the tree.
Apply a small amount of glue to secure the tree to the base.
Let it dry : your minimalist Christmas tree is ready
Comments
