Haru Studio

Report

Project made with xTool M1 Ultra machine for Laser cut and engrave.

Laser Engraved Wooden Logo Tag

Instruction

Mini Tags

.xcs

Application scenario

Laser processing

Machine & module

xTool M1 Ultra

10W, 20W

Compatibles · 13

Material used

1/8"(3mm) Walnut Plywood

Information

      Mini laser-engraved wooden logo tag. A tiny detail for your handmade pieces.
Use it as a pendant or sew it directly onto your project.
The file is fully editable, so you can add your own logo or text.

Laser Engraved Wooden Logo Tag

Instruction

Step1

First step:
Edit the file by adding your logo or text. Copy and paste the design into the other tag shapes included in the file. If you want to make only one tag, simply delete the extra tags.

Note:
Always run the preview/frame first and make any necessary size or position adjustments before starting the process.

Step2

Second step:
Open the xTool app and select Laser Mode.

Choose Walnut Plywood as the material.

Place the walnut plywood sheet inside your laser machine, then mark the position of the wood on the working area and perform Auto Measure.

Step3

Preview

Third step:
Use a needle to remove the excess wood from the side holes.

Because the tag is very small, the leftover wood pieces may not come out on their own.

Hold the tag with one hand and, with the other hand, gently push the small wood pieces out using the needle. Be careful with your fingers during this step.