Ash Amadian

Report

[Laser cut and engrave] Laser Engraved Wooden Piano Keyboard Keychain with Personalized Text — Project made with xTool M1 Ultra,xTool S1,xTool F1,xTool F1 Ultra,xTool F2,xTool F2 Ultra,xTool F2 Ultra (Single),xTool P2,xTool P2S,xTool P3 machine for Anniversary.

Laser Cut Wooden Piano Key Keychain with Personalised Text or Message

Instruction

Piano Keychain

.xcs

Application scenario

Laser processing

Machine & module

xTool M1 Ultra

10W, 20W

xTool S1

10W, 20W, 40W

xTool F1

10W

xTool F1 Ultra

20W

xTool F2

15W

xTool F2 Ultra

60W

xTool F2 Ultra (Single)

60W

xTool P2

55W

xTool P2S

55W

xTool P3

80W

Compatibles · 5

Material used

1/8"(3mm) Basswood Plywood

200

Information

      A tiny keepsake with a heartfelt story behind it.
Made from three layers of 3 mm basswood, this little piano key keychain comes together in a 50 × 30 mm design that feels both simple and meaningful.
The front is inspired by music, while the back is all about connection, a reminder of the moment when everything changed, when life truly began after meeting someone special.
With space for custom names, it’s made to celebrate love, memories, and the small moments that mean the most.

Instruction

Step1

Preview

Step 1 – Attach the big key layer
Start by gluing the big key layer (the light-colored layer with vertical slots) onto the back panel.
Make sure all edges are aligned correctly, especially the corner with the keyring hole. Press gently and let it set.

Step2

Preview

Step 2 – Add the top frame
Once the first layer is secure, apply glue to the back of the top piano frame layer (small keys), then carefully place it on top, aligning the piano key shapes with the layer beneath.