Laser Cut Wooden First Christmas Ornament with Personalized Name and Hooks - Cowboy

Engrave and cut the first layer. Included are 3 total templates. Mr & Mrs, Mr & Mr, Mrs & Mrs. Swap out the engrave image and score outline depending on what you are needing. I recommend adding the one you want on top and then delete the layer you dont need.

I prepped the wood with 2 thin layers of matte Modge podge and let it dry before printing onto the wood. I find the colors come out a little brighter. To help with modge pod placement, you can score the cut area, put on the modge podge or ink aid, then print.

Included:

• 2 coat hook knobs
• 1 left cowboy hat
• 1 right cowboy hat
• 1 right cowboy hat with veil
• 1 veil
• Coat hook name sign

For the white boots and white veil - I painted the wood white before I engraved and cut them out. To help limit paint waste, you can set the cut outline to score the add ins you want to paint first, paint, then set it to cut. That's what I did for the hat too. I found that painting the boots anything darker then what the wood would engrave as (brown) that it wouldn't look right. So that's why the left boot pair is set to engrave.

Once everything is complete, you can choose to paint a few things. I painted the below with paint pens:

• Coat hook bars
• Coat hook knobs

Use wood good to place everything together. I like to use a paint brush to apply the wood glue.