Report
![[Laser cut and engrave,Other] Laser Engraved Merry Christmas Acrylic Ornament Decoration](https://storage-us.atomm.com/resource/xart/result/763905/964b6d60-9179-4761-b2c2-2d91561cc4f5.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Laser Engraved Merry Christmas Acrylic Ornament Decoration
2025 Christmas Contest
Instruction
Ornament
.xcs
Application scenario
Laser processing、Other
Machine & module
xTool F1
2W, 10WCompatibles · 4
Material used
1/8"(3mm) Clear Transparent Acrylic
2
37
Information
I wanted to do an ornament in clear acrylic. As part of the process, I have used both Tempera paint and black laser marking spray. I thought the laser marking spray gave a uniform coat so I stayed with that, although it could be costly in a production environment.
Instruction
1
Step1: The process
Preview
I wanted to make clear ornaments with laser engraved images. I chose the image above because it's a PNG file and has no background to deal with. I also spent about a day not getting good results, until I changed my image engrave parameters, basically, 100% is too strong, I limited my max power to around 60%, but I would go off of the engrave values in the file. I have a grid set up to show it how it works but I haven't updated it with my working parameters. I will probably upload it later.
2
Step2
For the image I chose, I went with the greyscale modifier and inverted the image.
Comments
