![[Laser cut and engrave] Support Téléphone Portable "Duo-Slot" pour Laser CO2 (3mm Bois)](https://storage-us.atomm.com/resource/xart/result/701023/60df3b48-997c-47cb-ae57-32a9789aa25f.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Support Téléphone Portable "Duo-Slot" pour Laser CO2 (3mm Bois)
Instruction
Information
Are you looking for the simplest, most stable and most portable phone holder possible? Our "Duo-Slot" design solves the problem of brackets tipping over or not fitting.
This model is perfect for the office, kitchen, or travel.
Instruction
Step1
📐 PHONE HOLDER MODEL FEATURES
Optimized Material: 3mm plywood (perfect for Poplar, Birch, or MDF).
Assembled Dimensions: 9 cm (Width) x 10 cm (Length) x 1.8 cm (Thickness).
Double Notch (Duo-Slot):
Notch A (Vertical) 10 mm: For phone without a protective case Ideal for watching videos or making video calls (angled angle).
Notch B (Vertical) 12 mm: Perfect for phone with protective case
🛠️ RECOMMENDED CUTTING SETTINGS (xTool P2S)
This file is optimized for clean cutting on a CO2 machine. For fast soot-free cutting:
Machine: xTool P2 / P2S (or any 50W+ CO2 laser).
Material: Poplar / Basswood plywood (3 mm measured, e.g. 2.90 mm).
Power: 60%
Speed: 27-30 mm/s
Air Assist: 100% (Crucial for edge cleanliness!)
(Pro Tip: Make sure to enter the actual thickness of your wood into the XCS software, and use Auto-Focus for a soot-free result.)
Feel free to leave a comment and a photo of your creation!
